Emergency rescue suit (including 1 rescue helmet, 1 pair of rescue goggles, 1 pair of rescue gloves, 1 pair of rescue boots, 1 set of hard elbow and knee pads, and 1 multi-function tool)
Product Classification:
Rescue Scene System
Keyword:
Emergency rescue suit (including 1 rescue helmet, 1 pair of rescue goggles, 1 pair of rescue gloves, 1 pair of rescue boots, 1 set of hard elbow and knee pads, and 1 multi-function tool)
Product Features
Product Details
(I) rescue helmet:
1. This product is in line with the XF633-2006 "firefighter rescue protective clothing" standard.
2. The rescue helmet is a multi-functional modular slide design, which is composed of helmet shell, slide rail, buffer layer, comfortable pad, wearing device, etc.
2.1 helmet shell is made of modified flame retardant nylon material.
Black multi-functional modular slide rails are arranged on both sides of the 2.2 helmet, which are made of modified flame retardant nylon.
2.3 buffer layer is made of polystyrene foam resin material, the color is black.
The 2.4 comfort pad is a top mesh pad, surrounded by a leather comfort layer (integrated with the cap band) to adjust the height of the cap. The lining adopts a five-point adjustable buckle to ensure that the helmet is firmly worn and does not shake during running and work. The head circumference of the cap hoop can be adjusted by the system to ensure free adjustment and locking within the range of 54-62CM. The wearing height of the front end of the cap hoop can be adjusted up and down, which is suitable for rescue personnel with different head types to wear comfortably and firmly.
The 2.5 wearing device includes a cap hoop and a tie strap, made of modified flame retardant nylon 66. A head circumference adjustment knob is arranged on the lower side of the rear edge of the helmet; the strap can be adjusted to wear tightness, and a breathable chin support with holes is installed; the buckle is a quick-release buckle. All adjustable fasteners are all yellow, modified flame retardant nylon 66 material.
3.Weight0.7985kg，Without affecting the overall protective performance, the helmet has ventilation function (ventilation holes can be opened or closed), and there are holes and slots to ensure the fastening of goggles, wearing system and other accessories. Lights can be installed.
★4.helmet impact absorption performance high temperature pretreatment3085N, low temperature pretreatment 3199.2N, immersion pretreatment 3046.9N, lateral rigid helmet cap shell maximum deformation 26.3mm, 5.7mm after unloading, chin strap does not break or slip, and its extension length is 16mm.
5. The appearance color of the helmet is orange.
6. Equipped with goggles matched with the appearance color of the helmet. The goggles conform to XF 1273-2015 "Fireman's goggles" standard: suitable for eye protection during emergency rescue and equipment use. The frame is firmly connected with the lens, and the lens is equipped with anti-scratch and anti-fog coating.Maximum impact of mirror surface120m/s。The frame is made of environmentally friendly, non-toxic and flexible polyvinyl chloride(PVC) material injection molding, with brightening effect.Quality108.13g。
(II) fire protection goggles:
★1. This product is in line with the XF1273-2015 "fireman goggles" standard and type requirements.
★2. Used in conjunction with emergency rescue helmets, fully enclosed with dust-proof exhaust port, with anti-fog coating, anti-scratch coating on the outside, tightening belt with Kevlar fiber rubber fabric belt, adjustable length,Width3.2cm thickening type.
3. The impact resistance of the mirror surface meets the standard of impact resistance of the XF1273-2015 "Fireman's Goggles" 5.7.
4. The frame is made of environmentally friendly, non-toxic and flexible polyvinyl chloride (PVC) material injection molding, with a brightening effect.
5.Total mass108.13g.
(III) rescue gloves:
★1. This product meets the requirements of the XF633-2006 "Firefighter Rescue Protective Clothing" standard.
2. Wear resistance: the palm surface material is not worn through after 8000 cycles of friction under 9 KPa pressure.
3. Anti-cutting performance: the cutting force of palm surface and back surface material is> 5N.
★4.Mechanical puncture resistance: the thinnest part of the palm surface material179N, the strengthening part of 269N, the back of the material to resist the puncture force of the thinnest part of 145N, the strengthening part of 190N.
5.Flame retardant performance: body protective layer fabric, sleeve protective layer fabric and outer layer reinforcement material throughAfter 5 times of washing, the flame retardant performance test was carried out. The damaged length of the bulk protective layer fabric cowhide was 13mm in warp direction, 12mm in weft direction, 0.2s in warp direction, 0.2s in weft direction, 20mm in warp direction, 22mm in weft direction, 0s in warp direction and 0s in weft direction,No melting, dripping phenomenon.
★6. Thermal stability: The whole rescue glove shall be kept at the test temperature of (180±5)℃ for 5min, with no obvious change on the surface, melting, dripping and peeling,The shrinkage comfort layer in the length and width directions is0.3%，0.7％，It can be worn normally.
7.dexterity performance: freehand control percentage108.5%。
8.Grasping performance: ratio of pulling force between wearing gloves and not wearing gloves87.8%。
9.Wear performance: wear time4.3s。
10. Appearance quality: The appearance quality of rescue gloves meets the following requirements:
10.1 sutures shall be straight and flat, with regular needle spacing and appropriate tightness, without needle skipping, open thread or disconnection;
The 10.2 has no rubber band fracture, different length, skewed lines, different tightness before and after, and the thumb is not right;
10.3 the label position is correct, the mark is accurate and clear.
(IV) rescue boots:
★1. The technical performance meets the requirements of the GB21148-2020 "Foot Protection Safety Shoes" and the XF633-2006 "Firefighter Emergency Rescue Protective Clothing" standards, and the test report has been provided.
★2. The main structure of firefighter's rescue boot: the height from the center of the heel of the boot to the lowest part of the boot mouth is ≥ 200mm; The inner side of the boot is provided with a zipper.
3. Sole even help production, to prevent degumming.
★4. Low waist design, firefighter rescue boots 41 yards mass is 1.464kg.
5.Boot Puncture Resistance174N。
6.Puncture resistance of shoe sole left1:2496N, left 2:2502N, left 3:2510N.
7. Flame retardant performance: the damaged length is 45mm, the self-extinguishing time from the fire is 0s, and there is no melting or melting drop.
8.Thermal insulation performance: The temperature rise of the inner surface of the shoe sole is 7.5 ℃.
9.Boot top anti-radiation heat penetration performance: inner surface temperature rise3.6 ° C.
10. Electrical insulation performance: breakdown voltage 6000V, leakage current left: 0.1, right 0.1, no breakdown.
(V) knee pads and elbow pads:
1. The outer layer of this product is made of high strength, good toughness, wear-resistant PVC, TPR (thermoplastic elastic material), TPU (thermoplastic polyurethane elastomer material) and other polymer materials; the inner cushion is made of EVA.
2. The inner layer is made of non-toxic, waterproof, good impact resistance, light buffer material;
3. The fixing device can be adjusted, using elastic breathable mesh and straps
4. Weight: 0.4kg.
(VI) multi function tool:
★1. This product has the following accessories: hammer head with diameter of 20mm, flat clamp with opening of 30mm, round clamp with opening of 25mm, cutting pliers with opening of 10mm, 50mm long double-tooth saw, 90mm high hammer, spike head knife, tooth blade knife, bottle opener, Phillips screwdriver, flat screwdriver and 40mm piece rubbing.2. Blade length: 50mm
3. Blade thickness: 2.5mm
4. Main knife material: high strength steel
5. Accessories material: high strength steel
6. Shank material: steel thermoplastic rubber
7. Body weight: 400g
Product Message
Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy
Links:Jiangxi Fire Association Jiangxi Fire Network Beijing Fire Network China Fire Association China Fire Online
Telephone:
0792-8798119
Fax:
0792-8798119
E-Mail：：
jjhcxf@163.com
Address:
No.6, Tonggang East Road, Chengxi Port District, Economic Development Zone, Jiujiang City, Jiangxi Province
Scan code to enter mobile terminal
Scan code to add WeChat public number
SAF Coolest v1.2 设置面板 GAGSD-ZGYF-JWZDE-ZDF
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page